Description
HEAT SETTINGS TO APPLY
Double Platen Press
Temperature 280 degrees top 320 degrees bottom for 40-45 seconds.
Single Platen Press
Temperature 300 degrees for 40-50 seconds.
Pressure: medium
Place a paper towel on top of the patch when heat pressing to the substrate
TIPS FOR BEST RESULTS
1. Focus right on the leatherette
2. Cleaning should not be necessary with leatherette products. However
if it is use a small amount of LA Awesome (part number = AWE32) on
a microfiber towel.
3. Confirm the position of your artwork by testing on a separate piece
of leatherette or tape a clear piece of plastic onto the item.
4. Vector cut mask or plastic for placement guides
RECOMMENDATIONS FOR HEAT TRANSFER MATERIAL
When personalizing a Leatherette item with Heat Transfer Material
JDS recommends:
Use Kota Pro ExPress
Weed: Reverse
Temperature: 240 Degrees Fahrenheit
Pressure: Medium
Time: 4 Seconds
Peel: Hot
Misc Note. Adhesive will not be tacky until heat is applied